|Name||Arria 10 PCIe Gen3 x8 DMA|
|Description||The design includes a high-performance DMA with an Avalon-MM interface that connects to the PCI Express Hard IP core. It transfers data either between on- chip memory and system memory or external memory and system memory. The reference design includes Linux software drivers that set up the DMA transfer. You can also use the software driver to measure and display the performance achieved for the transfers. This reference design allows you to evaluate the performance of the PCI Express protocol in using the Avalon-MM interface.|
|Development Kit||Arria 10 GX FPGA Development Kit|
Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.
Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.
Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.
At the command-line, type the following command:
Once the process completes, then type:
|Total Downloads||90 (From 24 May 2018 to 27 Nov 2018)|
|Quartus Prime Version||Download Quartus Prime v18.0|
|Quartus Prime Edition||Pro|
Last updated on July 12, 2018, 8 a.m.