Design Store


Nios II Simple Socket Server Ethernet Example for DECA  


CategoryDesign Example
NameNios II Simple Socket Server Ethernet Example for DECA
DescriptionThis design example demonstrates communication with a telnet client on a development host PC. The telnet client offers a convenient way of issuing
commands over a TCP/IP socket to the Ethernet-connected NicheStack TCP/IP Stackrunning on the DECA kit with a simple TCP/IP socket server example. The socket server example receives commands sent over a TCP/IP connection and turns LEDs on and off according to the commands. Note that this design uses DDR3 memory and boots uC OS...
Operating SystemNone
IP Core
IP CoreHeading
Version1.0
FamilyMAX 10
Device10M50DA
Documentation
DocumentDescription
DECA Simple socket server-
Read me FirstExtract the m10sss18q1_deca_additionalfiles.zip to project directory after .par extraction. It contains the following: 1. Master_image Folder : having tested ready-to-run .sof & .elf to execute on the board conencted. This is needs a 100Mbps Full duplex setting on the PC side for design to work. Autonegotiation or any other Speed & Duplex settings on PC side will not work as the DECA on board Phy is 10/100Mbps only & design was defaulted to forcefully-negotiate to 100Mbps only. 2. software Folder: having the nios II software & bsp folders which can be imported to any Nios II SBT workspace. Simple_Socket_Ethernet.pdf is of MAX 10 dev kit which can be correlated for the same or equivalent steps targeting DECA. Further queries you can get in touch with me - kasturi.rangan@arrow.com
Development KitArrow MAX 10 DECA
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/deca_q181_sss.par

Once the process completes, then type:

quartus_sh --platform –name deca_q181_sss

Download   (The download link will expire on Jan. 26, 2022, 12:36 p.m., please refresh the page to get a new link.)
Quartus Prime VersionDownload Quartus Prime v18.1
Quartus Prime EditionStandard
VendorArrow


Last updated on Aug. 20, 2020, 6:14 p.m.