Design Store


PCI Express Gen3 x16 AVMM DMA with On-Chip Memory Reference Design  


CategoryDesign Example
NamePCI Express Gen3 x16 AVMM DMA with On-Chip Memory Reference Design
DescriptionReference Design demonstrates DMA throughputs with PCIe Gen3 x16 AVMM with internal memory.
Operating SystemNone
IP Core
IP CoreHeading
Top level generated instrumentation fabricDebug & Performance
Altera IOPLLClocksPLLsResets
On-Chip Memory (RAM or ROM)OnChipMemory
MM InterconnectQsysInterconnect
Avalon-MM Slave AgentQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Memory-Mapped DemultiplexerQsysInterconnect
Memory-Mapped MultiplexerQsysInterconnect
Avalon-MM Master AgentQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
Memory-Mapped RouterQsysInterconnect
Memory-Mapped Traffic LimiterQsysInterconnect
Avalon-ST Pipeline StageQsysInterconnect
Memory-Mapped Burst AdapterQsysInterconnect
Reset ControllerQsysInterconnect
Version1.0
FamilyStratix 10
Device1SM21BH
Documentation
DocumentDescription
AN881AN 881: PCI Express* Gen3 x16 Avalon®-MM DMA with On-Chip, External or HBM2 Memory Reference Designs
Development KitStratix 10 MX FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/pcie_example_design_18_1_0_222.par

Once the process completes, then type:

quartus_sh --platform –name pcie_example_design_18_1_0_222

Download   (The download link will expire on Sept. 20, 2021, 10:21 p.m., please refresh the page to get a new link.)
Quartus Prime VersionDownload Quartus Prime v18.1
Quartus Prime EditionPro
VendorIntel


Last updated on May 13, 2020, 9:29 a.m.