Design Store


Cyclone 10 LP Nios II 'Hello World' Design  


CategoryDesign Example
NameCyclone 10 LP Nios II 'Hello World' Design
DescriptionEmbedded System implementation using Nios II, On-chip Memory, JTAG UART, PIO, and utilizes push button and LEDs to allow interaction with the Cyclone 10 LP Development Kit
Operating SystemNone
IP Core
IP CoreHeading
IRQ MapperQsysInterconnect
JTAG UARTConfigurationProgramming
PIO (Parallel I/O)Other
MM InterconnectQsysInterconnect
Avalon-ST AdapterQsysInterconnect
Avalon-ST Error AdapterQsysInterconnect
Memory-Mapped DemultiplexerQsysInterconnect
Memory-Mapped MultiplexerQsysInterconnect
Avalon-MM Slave AgentQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Avalon-MM Master AgentQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
Memory-Mapped RouterQsysInterconnect
Nios II Gen2 ProcessorNiosII
Nios II Gen2 Processor UnitNiosII
On-Chip Memory (RAM or ROM)OnChipMemory
Reset ControllerQsysInterconnect
Version1.0
FamilyCyclone 10 LP
Device10CL025
Documentation
DocumentDescription
Cyclone 10 LP Nios II Hello_World Lab Manual.pdfThis user manual describe the steps to implement an embedded Nios II system, build and a 'hello world' software program, make the pin assignments to push buttons and LEDs to allow interaction with Cyclone 10 LP development kit.
Development KitCyclone 10 LP FPGA Evaluation Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/C10LP_NiosII_hello_world.par

Once the process completes, then type:

quartus_sh --platform –name C10LP_NiosII_hello_world

Download   (The download link will expire on Oct. 22, 2021, 1:39 a.m., please refresh the page to get a new link.)
Quartus Prime VersionDownload Quartus Prime v17.0
Quartus Prime EditionStandard
VendorIntel


Last updated on Aug. 27, 2017, 10:37 p.m.