Design Store

Triple Rate SDI II VCXO Removal Reference Design for Arria 10 Devices (AN746)  

CategoryDesign Example
NameTriple Rate SDI II VCXO Removal Reference Design for Arria 10 Devices (AN746)
DescriptionThis reference design demonstrates the transmission and reception of video data using the Altera® SDI II MegaCore function and the Arria 10 GX FPGA Development Kit.
Operating SystemNone
IP Core
IP CoreHeading
Altera Arria 10 XCVR Reset SequencerOther
SDI II RX PHY ManagementTransceiverPHY
Reset ControllerQsysInterconnect
Arria 10 Transceiver Native PHYTransceiverPHY
Transceiver PHY Reset ControllerTransceiverPHY
SDI IITransceiverPHY
Arria 10 FPLLClocksPLLsResets
FamilyArria 10
Triple Rate SDI II Reference Designs for Arria 10 Devices (Application Note 746)This application note describes the design components and requirements. It also includes the instructions on setting up and testing the reference designs.
Development KitArria 10 GX FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/sdi_tr_a10_es3_vcxoless_an746.par

Once the process completes, then type:

quartus_sh --platform –name sdi_tr_a10_es3_vcxoless_an746

Download   (The download link will expire on Dec. 5, 2021, 10:54 a.m., please refresh the page to get a new link.)
Quartus Prime VersionDownload Quartus Prime v16.0
Quartus Prime EditionStandard

Last updated on May 31, 2016, 5:33 p.m.