Design Store

SPI Slave to Avalon Master Bridge for CVSX  

CategoryDesign Example
NameSPI Slave to Avalon Master Bridge for CVSX
DescriptionThis design example shows how to use the SPI Slave to Avalon Master Bridge which provide connection between host system and remote system for SPI transaction on Cyclone V SoC dev kit.
Operating SystemBareMetal
IP Core
IP CoreHeading
Altera PLLClocksPLLsResets
Nios II Gen2 ProcessorNiosII
Interval TimerPeripherals
IRQ MapperQsysInterconnect
JTAG UARTConfigurationProgramming
MM InterconnectQsysInterconnect
Avalon-ST AdapterQsysInterconnect
Avalon-ST Error AdapterQsysInterconnect
Memory-Mapped DemultiplexerQsysInterconnect
Memory-Mapped MultiplexerQsysInterconnect
Avalon-MM Master AgentQsysInterconnect
Memory-Mapped Traffic LimiterQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
Avalon-MM Slave AgentQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Memory-Mapped RouterQsysInterconnect
On-Chip Memory (RAM or ROM)OnChipMemory
Reset ControllerQsysInterconnect
SPI (3 Wire Serial)SPI
System ID PeripheralOther
SPI Slave to Avalon Master BridgeSPI
FamilyCyclone V
CVSX SPI Slave to Avalon Master Bridge Quick Reference Guide-
Development KitCyclone V SoC Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/spi_slave_to_avalon_master.par

Once the process completes, then type:

quartus_sh --platform –name spi_slave_to_avalon_master

Download   (The download link will expire on April 10, 2021, 12:26 p.m., please refresh the page to get a new link.)
Quartus Prime VersionDownload Quartus Prime v16.0
Quartus Prime EditionStandard

Last updated on May 13, 2016, 9:15 a.m.