Design Store


Arria 10 Multi Rate (Up to 12G-SDI) SDI II with External VCXO Reference Design  


CategoryDesign Example
NameArria 10 Multi Rate (Up to 12G-SDI) SDI II with External VCXO Reference Design
DescriptionThis reference design demonstrates the transmission and reception of multi rate (up to 12G-SDI) video data using the Altera® SDI II Megacore function, Arria 10 ® GX FPGA Development Board and FMC Video I/O Development Module VIDIO-12G-A (Nextera FMC Daughter Card)
Operating SystemNone
IP Core
IP CoreHeading
Altera Arria 10 XCVR Reset SequencerOther
ALTCLKCTRLClocksPLLsResets
SDI II RX PHY ManagementTransceiverPHY
Reset ControllerQsysInterconnect
Arria 10 Transceiver Native PHYTransceiverPHY
Transceiver PHY Reset ControllerTransceiverPHY
SDI IITransceiverPHY
Arria 10 FPLLClocksPLLsResets
Version1.0
FamilyArria 10
Device10AX115
Documentation
DocumentDescription
Arria 10 Multi Rate SDI II With External VCXO Reference Design Apps NoteThis Apps Note mainly describes the arria 10 multi rate SDI II with external VCXO reference design block diagram and also the steps to implement in hardware.
Development KitArria 10 GX FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/sdi_mr_a10_vcxo_an768.par

Once the process completes, then type:

quartus_sh --platform –name sdi_mr_a10_vcxo_an768

Download   (The download link will expire on Jan. 23, 2020, 6:29 a.m., please refresh the page to get a new link.)
Total Downloads139 (From 31 May 2016 to 06 Dec 2019)
Quartus Prime VersionDownload Quartus Prime v16.0
Quartus Prime EditionStandard
VendorIntel


Last updated on Aug. 9, 2016, 11:25 p.m.