Design Store

ADC example for use with Board Test System Monitor Panel  

CategoryDesign Example
NameADC example for use with Board Test System Monitor Panel
Description10M50DA device has two analog-to-digital converters (ADC) which can be used to monitor the internal temperature of the die and support external analog signal conversion. So this design example is used to check out FPGA embedded ADC components alongside with external DAC and potentiometer on the board. Please download the installer of MAX 10 FPGA development kit and use BTS GUI to try it out.
Operating SystemNone
IP Core
IP CoreHeading
Avalon ALTPLLClocksPLLsResets
PIO (Parallel I/O)Other
altera_jtag_avalon_masterQsysInterconnect
Avalon-ST Bytes to Packets ConverterQsysInterconnect
Avalon-ST Channel AdapterQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-ST JTAG InterfaceQsysInterconnect
Avalon-ST Packets to Bytes ConverterQsysInterconnect
Reset ControllerQsysInterconnect
Avalon-ST Timing AdapterQsysInterconnect
Avalon Packets to Transaction ConverterQsysInterconnect
MM InterconnectQsysInterconnect
Avalon-ST AdapterQsysInterconnect
Avalon-ST Error AdapterQsysInterconnect
Memory-Mapped DemultiplexerQsysInterconnect
Memory-Mapped MultiplexerQsysInterconnect
Avalon-MM Slave AgentQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Avalon-MM Master AgentQsysInterconnect
Memory-Mapped Traffic LimiterQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
Memory-Mapped RouterQsysInterconnect
Altera Modular ADC coreADC
Altera Modular ADC Control coreADC
Altera Modular ADC Sample Storage coreADC
Altera Modular ADC Sequencer coreADC
Version1.0
FamilyMAX 10
Device10M50DA
Documentation
DocumentDescription
ADC_Convertor_Using_MAX_10_FPGA_Development_KitA simple design spec for ADC design example
Development KitMAX 10 FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/adc.par

Once the process completes, then type:

quartus_sh --platform –name adc

Download
Total Downloads278 (From 18 Jul 2016 to 03 Aug 2018)
Quartus Prime VersionDownload Quartus Prime v16.0
Quartus Prime EditionStandard
VendorIntel


Last updated on July 18, 2016, 11:46 a.m.