Design Store

Adapting Digilent PmodCLP LCD Display to DE10 Lite Development Kit Arduino Shield Header  

CategoryDesign Example
NameAdapting Digilent PmodCLP LCD Display to DE10 Lite Development Kit Arduino Shield Header
DescriptionReference design that prints an array of 1s and 0s to an LCD indicating the status of each switch on the dev kit.
Operating SystemNone
IP Core
IP CoreHeading
IRQ MapperQsysInterconnect
JTAG UARTConfigurationProgramming
Altera Avalon LCD 16207Peripherals
PIO (Parallel I/O)Other
MM InterconnectQsysInterconnect
Avalon-ST AdapterQsysInterconnect
Avalon-ST Error AdapterQsysInterconnect
Memory-Mapped DemultiplexerQsysInterconnect
Memory-Mapped MultiplexerQsysInterconnect
Avalon-MM Slave AgentQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Avalon-MM Master AgentQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
Memory-Mapped RouterQsysInterconnect
Nios II Gen2 ProcessorNiosII
Nios II Gen2 Processor UnitNiosII
On-Chip Memory (RAM or ROM)OnChipMemory
Reset ControllerQsysInterconnect
System ID PeripheralOther
FamilyMAX 10
User GuideAdapting Digilent PmodCLP LCD to Arduino Development Kit with switches and “Hello World” display
Using the NIOS Processor Online TrainingLearn about the Nios® II embedded soft processor v. 14.1. Learn the basics of the Avalon Standard Interface and the Qsys high performance network-on-a-programmable-chip architecture. Learn to use the Qsys system integration tool to develop & configure customized Nios II processor-based hardware systems. Utilize the associated Nios II processor and Qsys “Hello World” lab on the Altera MAX® 10 Development kit to exercise the concepts discussed in the slides and associated tool demonstrations included in this class.
Development KitMAX 10 DE10 - Lite
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/hello_LCD.par

Once the process completes, then type:

quartus_sh --platform –name hello_LCD

Download   (The download link will expire on July 6, 2020, 8:59 p.m., please refresh the page to get a new link.)
Total Downloads158 (From 18 Nov 2016 to 06 Dec 2019)
Quartus Prime VersionDownload Quartus Prime v16.0
Quartus Prime EditionStandard

Last updated on June 2, 2020, 5:57 p.m.