Design Store

I2C Remote System Update Example  

CategoryDesign Example
NameI2C Remote System Update Example
DescriptionThis example demonstrates a remote system upgrade using the I2C protocol. It requires two kits- a Max 10M50 Development Kit to be used as the I2C master, and a Max 10M08 Evaluation Kit to be used as the I2C slave. The Max 10M50 controls the remote upgrading of the Max 10M08 device.
Operating SystemBareMetal
IP Core
IP CoreHeading
PIO (Parallel I/O)Other
Nios II Gen2 ProcessorNiosII
IRQ MapperQsysInterconnect
JTAG UARTConfigurationProgramming
MM InterconnectQsysInterconnect
Avalon-ST AdapterQsysInterconnect
Avalon-ST Error AdapterQsysInterconnect
Avalon-MM Slave AgentQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Memory-Mapped DemultiplexerQsysInterconnect
Memory-Mapped MultiplexerQsysInterconnect
Avalon-MM Master AgentQsysInterconnect
Memory-Mapped Traffic LimiterQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
Memory-Mapped RouterQsysInterconnect
Altera On-Chip FlashFlash
On-Chip Memory (RAM or ROM)OnChipMemory
Avalon ALTPLLClocksPLLsResets
Reset ControllerQsysInterconnect
FamilyMAX 10
Max 10 User Flash Memory Guide-
User GuideUser Guide for I2C Remote System Update Example
Development KitMAX 10 FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/i2c_rsu.par

Once the process completes, then type:

quartus_sh --platform –name i2c_rsu

Download   (The download link will expire on Feb. 18, 2020, 4:04 a.m., please refresh the page to get a new link.)
Total Downloads267 (From 10 Nov 2015 to 06 Dec 2019)
Quartus Prime VersionDownload Quartus Prime v15.1
Quartus Prime EditionStandard

Last updated on Nov. 25, 2015, 2:19 p.m.