Design Store

Altera PHYLite for Parallel Interfaces Loopback Simulation Reference Design  

CategoryDesign Example
NameAltera PHYLite for Parallel Interfaces Loopback Simulation Reference Design
DescriptionThe simulation reference design is a simple design that simulates the behavior of the Altera PHYLite IP core for a loopback data transfer.
Operating SystemOther
IP Core
IP CoreHeading
Altera PHYLite for memoryTransceiverPHY
PHYLite Core Component for 20nm FamiliesSerialLite
FamilyArria 10
Altera PHYLite for Parallel Interfaces Loopback Reference Designs Application Note This application note showcases loopback reference designs using the Altera PHYLite IP core.
Development KitArria 10 GX FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/phylite_top_sim_only.par

Once the process completes, then type:

quartus_sh --platform –name phylite_top_sim_only

Download   (The download link will expire on Aug. 11, 2020, 12:02 a.m., please refresh the page to get a new link.)
Total Downloads48 (From 29 Dec 2015 to 06 Dec 2019)
Quartus Prime VersionDownload Quartus Prime v15.1
Quartus Prime EditionStandard

Last updated on Jan. 21, 2016, 9:44 p.m.