Design Store

Arria 10 DDR3 x40 with EMIF Debug Toolkit  

CategoryDesign Example
NameArria 10 DDR3 x40 with EMIF Debug Toolkit
DescriptionDDR3 x40 design running at 1067MHz for Arria 10 GX development kit with EMIF debug toolkit
Operating SystemNone
IP Core
IP CoreHeading
Arria 10 External Memory InterfacesExternalMemoryInterfaces
EMIF Core Component for 20nm FamiliesExternalMemoryInterfaces
Arria 10 External Memory Interfaces Debug ComponentExternalMemoryInterfaces
Avalon-MM Pipeline BridgeQsysInterconnect
alt_mem_if JTAG to Avalon Master BridgeBridgesAndAdaptors
Avalon-ST Bytes to Packets ConverterQsysInterconnect
Avalon-ST Channel AdapterQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-ST JTAG InterfaceQsysInterconnect
Avalon-ST Packets to Bytes ConverterQsysInterconnect
Reset ControllerQsysInterconnect
Avalon-ST Timing AdapterQsysInterconnect
Avalon Packets to Transaction ConverterQsysInterconnect
MM InterconnectQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
EMIF Example Avalon Traffic GeneratorExternalMemoryInterfaces
FamilyArria 10
Arria 10 DDR3 x40 with EMIF Debug ToolkitDescription on the design. Basic operation of the design and guide on implementing the design on customer end
Development KitArria 10 GX FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/arria10_ddr3.par

Once the process completes, then type:

quartus_sh --platform –name arria10_ddr3

Download   (The download link will expire on Feb. 28, 2021, 3:07 p.m., please refresh the page to get a new link.)
Quartus Prime VersionDownload Quartus Prime v15.0
Quartus Prime EditionStandard

Last updated on Oct. 8, 2015, 10:29 a.m.